PDA

View Full Version : Cannister filtration....


fiveoboy01
03-27-2007, 02:39 PM
I am looking for a way to adapt cannister filtration to my Kawi 19 on the TT, because, well, the stock filter simply sucks.

Anyone ever done this, or think it would be possible to implement some parts from exmark(IE one of their mowers with cannister filtration) for use in my application?

DLCS
03-27-2007, 02:54 PM
Your dealer should have a kit for the nelson canister conversion. I have the canister filter on my JD 647 and it uses a 19hp Kawasaki.

Meg-Mo
03-27-2007, 03:53 PM
Check enginaire clean air systems. The make a lot of filters. www.enginaire.com

Richard Martin
03-27-2007, 05:18 PM
Just make sure you get the correct one for your application. Kawasakis carbs are very sensitive to air flow and I've seen them run really bad with just a turbo precleaner installed. See Meg-Mo's enginaire for a turbo precleaner.

ohanyan1
03-27-2007, 05:29 PM
99999-7040 is the Kawasaki part number for a cannister air filter kit. Be careful as the carb needs to be re-jetted after this install. I had the same kit installed on my 17hp TTHP 48" and have been very happy with it. The kit was about $300 installed.