PDA

View Full Version : Need help w/ 36" Toro WB


eddings
03-29-2007, 10:33 AM
I bought this used last fall and have put about 10hrs on it so far. I was mowing a lawn yesterday and it all of a sudden quit driving forward or backwards. All the belts are moving when in gear and in neutral. When I push forward all pulleys stop and it doesn't move. Do I need to adjust the clutch or have it replace? I have no experience with this machine, and am at a loss.

When thinking back it did seem that it was moving slower than average for a while before this happened.

Any help would be apprieciated.

barnard
03-29-2007, 10:44 AM
The belt underneath the engine that goes to the tranny might be loose, or the input pulley on the tranny slipping due to bad key.

eddings
03-29-2007, 10:55 AM
The belt underneath that goes to the tranny stops as well as the pulley itself. Engine doesn't change rpms at all.

GreenClips
03-29-2007, 01:00 PM
it might be a couple on the the trans...thats what happened to me last year...but im not sure...sounds liek about the same type of thing...

GreenClips
03-29-2007, 01:01 PM
sorry coupler*

barnard
03-29-2007, 05:35 PM
The belt underneath that goes to the tranny stops as well as the pulley itself. Engine doesn't change rpms at all.

It's either way loose or one or the other pulleys is spinning on the shaft