View Full Version : tracking adjustment on walker

General Grounds
04-07-2007, 11:42 PM
:confused: late last year my walker started pulling hard left, tried to adjust the sticks but still no good, the right hydro pump wyned badly so i replaced it thinking the pump was the reason why it pulled left. well same problem as last fall and im stumped. any help?

04-08-2007, 08:36 AM
hello, go and purchase a manual it explains it well .In a nut shell adjust str levers to a spec then the pumps on the adjusters to a neutral rotation of the drive wheels [wheels jacked up ].
U may discover linkages r worn and/or the hydro pulley is worn out on one side also. This will influence the above procedure eg machine will require adjustment to allow 4 this generally reducing forward speed .

Numerous tensioner designs for the ground drive belts, v belt and the micro- v
Ground drive pulley wear is common [5x pulleys] [3x idlers ]
There is also an upgrade 4 the tensioner arm pivot bearings

Experienced all of the above .


04-08-2007, 08:50 AM
Which model is yours , the above details is after my own experience on my 2x walkers both MT model.