PDA

View Full Version : Honda Clutch Problem


YLC1
04-15-2007, 07:52 PM
I have a Honda HR214 that the blade brake clutch won't disengage.The cable isn't stuck.Could it be the return springs have gotten weak?Maybe gunk keeping it from releasing?Thanks,Richard

dutch1
04-16-2007, 09:00 AM
When the clutch cable is activated there is a three ball bearing assembly that cams up to engage the clutch. I would check for debris or a small piece of a branch that may be causing one of the ball bearings to not release. Otherwise I would suspect a gummed up assembly.

Dutch

Bill Kapaun
04-16-2007, 02:45 PM
This link MIGHT help-

http://www.planopower.com/store/honda/honda_hr214_bbc_assembly.shtml

YLC1
04-16-2007, 09:36 PM
Thanks for the advice and the link.I'm getting ready to tear into the clutch tomorrow.Thanks again,Richard