PDA

View Full Version : 36" exmark bucking problem


sabely
04-16-2007, 05:26 PM
I have a problem with my exmark metro walk behind m3613ka. The mower
bucks in lower gear and more when the machine starts on an incline. It's
a 2002 machine that is serviced routinely. I had the trans drive belt,
trans drive idler, idler pulley replaced in '05 during it's spring
service. I have tried adjusting the handles and brakes this year with no
luck. Any help is appreciated.

Restrorob
04-16-2007, 06:57 PM
First check your drive axles and coupler splines for wear/slippage, If they are fine then it's most likely worn (Rounded) shift keys and or the mating surface (center of the gears) inside the trans.

sabely
04-18-2007, 07:51 PM
Any chance you could dumb it down for me to understand:confused:
I have some mechanical capacity, but I need a little help on the coupler splines.
Would they be in the schematic for the machine

Mark in MD
04-19-2007, 09:40 AM
Not sure if you have a peerless or a variable speed, but from your description, it sounds like a peerless (5 speeds plus reverse). It may be that a gear inside the trans that is used in lower gear is broken.

Restrorob
04-19-2007, 01:13 PM
Would they be in the schematic for the machine

Yes, Look at the parts break-down and everything I mentioned will be listed.