PDA

View Full Version : Honda HRX217 engine swap


dunninggb
04-24-2007, 05:38 PM
I recently bent the crank shaft on my HRX217TDA. Is it possible/easy to replace it with the GSV190 engine. Currently it has the GCV190. Is the shaft the same size? I think my current shaft is 7/8". Would there be any problems with the deck mounting?

dunninggb
04-24-2007, 09:47 PM
I measured the shaft on the GCV190 and it appears to be about 1 inch which would be 25 mm with a length of 3.25 inches. I Don't know if the GSV190 has a variation with this size shaft.

Restrorob
04-24-2007, 10:27 PM
Contact this place, They should be able to answer any questions about this swap;

http://www.haydist.com/index.htm