PDA

View Full Version : Bean 2080 Pump


MarcSmith
04-25-2007, 04:48 PM
Any sponsors sell rebuild Kits for this pump? or possibly a shurflo 2088-313-145 so I can convert from gas to electric pump?? Or even a larger shurflo with more GPM..

thanks

squirtgun
04-25-2007, 06:11 PM
How many GPM are you looking for in an electric pump?Also,are you looking for something to run off a battery or generator?
Bob at Pressure Tek carries a Delavan capable of 5gpm.
http://www.pressuretek.com/delavanpumps.html

MarcSmith
04-25-2007, 10:35 PM
I was looking for 3-5gpm. it was going to run it on a gas powered golf cart battery. but the 9 amp draw is going to be too much for the starter/generator to handle on a regular basis. The shop manager feels that I may start burning out the electronics as the generator tries to recharge the battery rather than just maintaining it from normal use.

Now if I had an electric golf cart that gets plugged in each night, it woudl be different. But I still have lots of life left in my cart so i don't see an electric in my future.

So I guess I'll be rebuilding the 2080....

squirtgun
04-26-2007, 12:40 AM
We run our 12v pumps off of deep cycle marine batteries.If you have room to mount one it's the way to go.

This one was build to military specs and can run 2-3gpm pumps at the same time.

MarcSmith
04-26-2007, 07:53 AM
Yeah but to toss another batty in the cart, plus the water and stuff, I might as well just rebuild the 2080 and keep the gas engine. keep my 100 psi and 10 GPM

bug-guy
07-28-2007, 07:48 AM
google spray parts depot

MarcSmith
07-28-2007, 11:55 AM
Actualy I spoke with my local Lesco, and thats who they told me to go to as well....I bought the rebuilt kit back in may...