hard to cut

[ylwcbr]

Ihave 46" lazer hp with mulch kit. Having hard time with tall weed grass. I have to go over it two times. Also having same problem with standard blades and side discharge. Any suggestions I am in south MS.

[Nredo]

I was having a hard time with weeds and thin high grass last year and the dealer adjusted something on the deck and it has been mowing better. Do you have an '06 or an'07 mower? I use gators and the mulch kit. if it cuts bad this year I will get the fix kit installed. I have an '06 HP 46" 19hp kawi

[ylwcbr]

I have the '06 46" cut with the 19hp kawi engine. was also looking into the change from exmark. was cutting with a guy on a lawn tractor with no lift on blades andd he was out cutting me. Making me think air pressure under deck keeping grass down.

[hilltop07]

i was reading the other day, that there was a kit to fix a baffle problem and to raise the blade tip speed. actually three different fixes, but can't remember the other one. i am having same problem too.

[eXmark]

i was reading the other day, that there was a kit to fix a baffle problem and to raise the blade tip speed. actually three different fixes, but can't remember the other one. i am having same problem too.
Hello,

Here are the 3 modifications to the 2006 Triton deck. If you have any questions please contact us at 402-223-6375 or visit with your local dealer.

There are three modifications.
1. Modify the flow control baffle between the center and discharge blade.
2. Change the blade tip speed to levels closer to 19,000 FPM allowed by the safety standard.
3. Add a scrowl baffle in the left hand cutting chamber to address an air flow
turbulance issue between the left and center blade.

All of these modifications will be available in a single update kit based on the cutting width.
All 2007 production units are being designed to these new standards.

Brian

[John Gamba]

Hello,

2. Change the blade tip speed to levels closer to 19,000 FPM allowed by the safety standard.

Brian


Thank you.

[waterboy1]

I was told that if you run the mulch kit, the only thing that can be done is to change the pulleys to speed up the blades.

Jason

[ylwcbr]

Just ran with update kit works great one or two left behind in tall weeds instead of half the row.

[hilltop07]

are the kits covered under warranty and mounted for free by dealer or do we need to purchase kit? my dealer was not sure whether the pulley system to speed up blades was covered. thanks

[eXmark]

are the kits covered under warranty and mounted for free by dealer or do we need to purchase kit? my dealer was not sure whether the pulley system to speed up blades was covered. thanks
Hello Hilltop07,
Yes all of the updates are covered by manufacturer warranty with your local dealer installing the updates.
Thanks,
Brian

[John Gamba]

Hello Hilltop07,
Yes all of the updates are covered by manufacturer warranty with your local dealer installing the updates.
Thanks,
Brian


Brian!

Please tell your mother i said happy mothers day.

[eXmark]

Brian!

Please tell your mother i said happy mothers day.

Well thank you John and tell your Mother the same!

[John Gamba]

Well thank you John and tell your Mother the same!


I will.---------------