View Full Version : husqvarna chainsaw won't run
05-01-2007, 02:56 PM
I have a model 61 chainsaw that sat for a few years. I cleaned it up, flushed gas, new plug. Saw started, but barely. It ran like it was loading up. No change with any carb adjustments, just chugs. I put a kit on the carb, and it ran like new for about 10 minutes....then back to chuggin.....Any Ideas????
Carb adjustments made no difference again.
My ques'um would be that a tinnsy fuel port inside the carburator is semi gummed,perhaps tank or filter inside fuel tank is due for service.. my big touchyness is i pour out any gas sitting more than 3mths, and run the engine/carb completely dry.
05-05-2007, 08:27 AM
check the muffler it see if it is stopped up
05-06-2007, 11:04 PM
Thanks for the ideas......I'll try them out and let you know what happens.
06-04-2007, 01:59 PM
It was a plugged muffler......Thanks much for the info!
06-04-2007, 09:01 PM
lots o times the fuel line has a crack in it, cheapest thing to replace.
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.