View Full Version : front seal on a kohler engine
05-02-2007, 06:39 PM
The front seal went on my kohler engine on my lazer. Are they easy to put on, do you have to pull the engine? I put the rear seal on last year that was pretty easy thanks rob.
05-02-2007, 06:56 PM
He will need tje engine size and probably the serial number off the mower. But I beleive you have to pull the engine..
05-02-2007, 07:04 PM
The flywheel must be removed to get to that seal.
Just a word of caution; DO NOT use two pry bars under the flywheel and whack the top of the crankshaft to pop it loose. Doing so could add the cost of a new flywheel to your repair, The magnets could pop loose from the shock.
USE a puller of some sort, A automotive steering wheel puller is a good choice.
05-02-2007, 07:07 PM
05-02-2007, 07:59 PM
The serial no. 272 480 4547 m ch22s. So I could use a pulley puller on the flywheel ? And to put the seal in, use pvc pipe over the seal, then tap it in until flush?
05-02-2007, 08:24 PM
You got the idea.....
05-03-2007, 06:45 AM
Thanks for your help.
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.