PDA

View Full Version : Deere Striping Kit

Travis E
05-09-2007, 06:07 PM
I was asked to show some pictures of it...so here they are. I got it yesterday, took about 45 min to put on, and the only major thing that you had to do is drill 4 holes in the deck and two on the rear anti-scalping wheel supports.

The only thing that I would do different is put the roller on before you put the rear wheels back on but the instructions say to put the wheels on then the roller. It would make it a little easier to do this way. If you want anymore pictures let me know.
Travis E
05-09-2007, 06:10 PM
Here is a picture of how it does...not the best yet but its all I have for now untill it stops raining.(it was mowed last night and the picture was taken this afternoon)
Lawn_Boy
05-09-2007, 08:59 PM
Lookin good!
JDWalkbehind
05-10-2007, 09:34 PM
thanks for the pic's it really looks good i apperciate it. stripe looks really good.

nick
JDWalkbehind
05-10-2007, 09:36 PM
one question do you put the anti-scrape wheels on or not? thanks!!!
Travis E
05-10-2007, 10:00 PM
one question do you put the anti-scrape wheels on or not? thanks!!!

No, you leave the back anit-scalp wheels off.
Loy's Home Services, LLC
05-11-2007, 11:55 PM
How much was it?
deereman
05-12-2007, 11:20 PM
It looks good but it is installed wrong! The first picture that you have there the bolts should be in the other holes.. Look at it from the side youll see what I mean. The way you have it it is on there at an angle. I have the same one as you do on one of our Z-Traks. You can even tell by the space in front of the tires, Check it out.
Travis E
05-13-2007, 12:51 AM
It looks good but it is installed wrong! The first picture that you have there the bolts should be in the other holes.. Look at it from the side youll see what I mean. The way you have it it is on there at an angle. I have the same one as you do on one of our Z-Traks. You can even tell by the space in front of the tires, Check it out.

Ya, I saw that once I posted it so I went and checked it out. If you see the sticker on the one bracket, it has the 60" and 72" marked wrong...got that all taken care of. But you have a good eye to notice that.
Travis E
05-13-2007, 12:52 AM
How much was it?

After tax and shipping it was around $340
johndeerefan
06-07-2007, 10:47 PM
wow thats cool do you know if they make a striping kit for a 48" cut?
POPO4995
06-08-2007, 07:47 PM
Deere makes striping kits for all sizes: 48", 54", 60", and 72". Just ordered 3 kits for the 737, 757, and X720!
ed2hess
06-08-2007, 10:58 PM
It looks like it is mounted solid to the deck....so if you mow at high setting it doesn't touch the ground?