PDA

View Full Version : Honda Harmony 100 Tiller


irish77060
05-16-2007, 01:04 PM
Man...this thing just makes me want to )(^%$%$^*&*!!!!

Maybe one of you can help...the carb seems to be loading up with fuel. If I remove the plug, crank it over a few times, replace the plug; then it will crank and run for about 1/2 of a second. I've cleaned the carb unit, which was pretty spotless to begin with, but the blasted thing just keeps flooding out. I'm...

Clueless In Atlanta

khouse
05-16-2007, 03:59 PM
Did you try a new plug? Sounds like you need to rebuild the carb if the new plug doesn't do it.

Restrorob
05-16-2007, 06:01 PM
I agree with khouse, Sounds like the carb. needs rebuilt.

Can you post the full model and serial number so I can take a look at it ?

irish77060
05-17-2007, 01:24 PM
Thanks for the replies. The plug is firing very well. As to the model and serial numbers:

Model FG100
Serial FZCV-6090351

THANKS HEAPS!:eek:

Restrorob
05-17-2007, 07:43 PM
Here is the carb. break-down in case you need it for re-assembly, I have seen too many people get ref. #2 and #4 along with #1 and #3 swapped around and had problems.


http://i107.photobucket.com/albums/m314/Restrorob/HondaHarmonyTillerCarb.jpg


Below is the reference/part number doc.

irish77060
05-17-2007, 10:27 PM
Thank you!

mtech12
05-25-2007, 09:06 PM
Restro Rob I have one of these tillers and need carb parts were can I buy them Model # FG100A1 serial # FZCV-6093984 Need the black fuel line that goes to tank and the one in the tanks as well as the Rubber prime ball and all gaskets for complete clean and rebuild... Can you help
Mtech@starpower.net

Restrorob
05-25-2007, 09:17 PM
mtech12, Welcome To LawnSite !

Contact these people they should be able to help you out;


http://www.planopower.com/parts.html