PDA

View Full Version : Spark Plugs


nickslawn
05-19-2007, 03:33 PM
I just bought a used snapper rear engine rider, it beats pushing, and the plug is black. It is a champion j19lm. Its is a 8hp 30"cut briggs. What other plug would you use and why? I know that champion are bottom of the line plugs so I need something that will stand up to everyday use. Yes I know the mower is not commerical but I have been pushing yards way to long.

Thanks in Advanced!

bobcat175
05-19-2007, 03:41 PM
What's the model# of the engine?....go to the briggs site and look up what the mfg recommends.

pugs
05-19-2007, 04:08 PM
Thats the plug that belongs in it. RJ19LM or J19LM.

MuleCutter
05-19-2007, 05:26 PM
use NGK plugs.... should take the B4LM type.

mike green
05-19-2007, 07:59 PM
Idont think the spark plug is the problem its might be the choke sticking or the float maybe set to high could be dirty air filter if it has the carb that you can adjust could be that hope this helps good luck

Restrorob
05-20-2007, 12:24 AM
I agree with mike, Carb/Air filter problems.