View Full Version : Skid teer wont start sometimes.....
05-27-2007, 01:05 AM
Hey gyes quick question, ive got a Case 1840, i'll go out to start it but I get nothing but the buzzing noise, no sound of the starter motor, nothing, I wait 5 to 10 minutes and it start's, I get this more often when I haven't used it for a week or more, I thought about giving the battery connections a clean but I dont see why it would be that seeing's as though I wait a bit then it start's, any ideas?
05-27-2007, 05:57 AM
Clean them anyway. At least you eliminate that as a possible cause.
05-27-2007, 08:55 AM
Bill is right. Also make sure the battery ground to the machine and starter connection is clean and tight.
05-28-2007, 01:37 AM
Remember you have only 12 volts to work with. 12 volts is not enough to arc though dirt or corrosion. It takes every little dirt or corrosion to knock out a 12 volt system. Cleaning the battery terminals and wires (both ends) should always be the first thing you do when you have a starting problem.
05-28-2007, 07:32 AM
Okay i'll give them a clean on the weekend, thanks.
vBulletin® v3.8.6, Copyright ©2000-2015, Jelsoft Enterprises Ltd.