PDA

View Full Version : Prodigy Brake Controller


prosperity
05-30-2007, 06:05 PM
Well, I'm finally graduating to a 16' trailer for my new 30hp tractor.
I've never towed a trailer with electric brakes before, but I have pulled plenty of trailers with air brakes for sure (tractor-trailer).

So, after tons of research, I ordered and received the new Prodigy P3 controller. I will be hooking it up this weekend (thanks for the trailer package Ford...).

I always like to look at and read everything before starting out. Installation looks very straight forward. But as I read the directions, and watched the included DVD (pretty cool), I have a question.

I will be pulling the 16' trailer both empty and loaded with the tractor. I understand the initial setup instructions adjusting the output so the brakes just barely don't lock up. So, if I have it set that way when the trailer is empty, what should I do when I am loaded.

Looks like I have 2 options:

1 - reset the adjustment for no wheel lockup
2 - use the boost feature

Just wondering if that is what the boost feature is for.
Which is the better way to go between an empty trailer and loaded?

Thanks

monster
06-03-2007, 01:24 AM
I usually use the knob first and then if I want to change the sensitivity of the unit I'll add boost.