FS: New 23hp Kawa/52" float deck (Surper Surfer/Scorpion)

[aubdeer]

This mower has same spec's as the current Gen II Great Dane Super Surfer or EverRide Scorpion stand-on model. It was produced as a prototype by the factory and the only difference is color. This unit is absolutely brand new and has never cut grass! Hour meter reads 0.9 hours due to manufacturing set up and a short photo session. Service parts are readily available from any Great Dane or EverRide dealer. This is a one-of-a-kind that will certainly turn heads!!:clapping:
First $5,000 take it!
Contact via PM or (402)-274-7170 leave message



http://i3.photobucket.com/albums/y79/gerdes2003/1.jpg

http://i3.photobucket.com/albums/y79/gerdes2003/2.jpg

http://i3.photobucket.com/albums/y79/gerdes2003/3.jpg

http://i3.photobucket.com/albums/y79/gerdes2003/4.jpg

http://i3.photobucket.com/albums/y79/gerdes2003/5.jpg

http://i3.photobucket.com/albums/y79/gerdes2003/6.jpg

http://i3.photobucket.com/albums/y79/gerdes2003/7.jpg

http://i3.photobucket.com/albums/y79/gerdes2003/8.jpg

http://i3.photobucket.com/albums/y79/gerdes2003/9.jpg

MOWER - 52"
Engine Kawasaki® 23hp - FH680V
Displacement - 41.2 cid (675 cc)
Horsepower - 23 hp (17.2 kW)
Maximum Torque - 40.2 lb-ft (51.8 N-m)
Maximum RPM - 3600
Bore - 3.15 in (80.0 mm)
Stroke - 2.99 in (75.9 mm)
Cylinders - V-Twin
Type -Air Cooled

FUEL
Type - Gasoline Regular Unleaded Gasoline (Minimum 87 Octane)
Fuel Tank Capacity - 6 US Gal (22.7 L)

HYDROSTATIC DRIVE SYSTEM
Steering - Two Hand Control Levers, True Zero Turn

TIRES
Rear 20 x 8 - 8
Front 13 x 5 - 6

TRAVELING SPEED
Forward 0 - 9 mph (14.5 km/h)
Reverse 0 - 4.5 mph (7.2 km/h)
Transmission Two Axial Piston Pumps - Two Fixed Wheel Motors
Hydraulic Capacity 3.3 US qts (3.1 L)

ELECTRICAL SYSTEM
Battery 12V 340 CCA
Charging System Charge Coil
Charging Output 15 Amp
Starter 12V Electric - Bendix Type
Fuses 20 Amp

MOWER DECK
Mower Type Side Discharge
Cutting Width 52 in (1321 mm)
Cutting Height (.5 in Increments) 1.5 to 4.5 in (38 to 114 mm)
Blade Length 18 in (457 mm)
Number of Blades 3

WEIGHTS / MEASUREMENTS
Weight 930 lbs (422kg)
Overall Width 63 in (1600 mm)
Wheelbase 46 in (1168 mm)

[vkr]

Are you open to offers on this machine?
Where are you located?

[aubdeer]

This machine is already $1500 under the MSRP price, but I am willing to entertain offers or trades. I am confident that with current interest in the stand-on units that I will not have a problem selling this unit for $5,000. It comes with a service and parts manual for both the Everride Scorpion and Great Dane Super Surfer and is BRAND NEW. The unit is located in Auburn, NE and shipping can be arranged at the buyers expense.

[thebeans]

Interesting...I've been looking at the standers. How much for shipping to 24293 commercial location with a loading dock / forklift. Can you take Paypal? Thanks.

[aubdeer]

I will have to wait until monday to check on shipping but I will let you know as soon as possible...

[corey4671]

pretty sure you can buy one brand new off showroom for 4995

[Mower For Less]

What about warranty? Does it come with one? And if it does, will there be any problems with a local dealer honoring it?

If not, seems like the price should be a lot less to compensate for that fact.

Kevin

[aubdeer]

pretty sure you can buy one brand new off showroom for 4995

The unit you are talking about buying for $4995 is a 19HP Kawasaki Kai with a 52" fixed deck in either the Great Dane Surfer or Everride Scorpion FX. This unit has the 23 HP big block Kawasaki and a 52 inch float deck and is just like the Everride Scorpion or Great Dane Super Surfer.

[aubdeer]

What about warranty? Does it come with one? And if it does, will there be any problems with a local dealer honoring it?


No, the unit does not come with any warranty, but you would receive a parts manual for it that would allow you to order parts from any Great Dane or Everride dealer.

[vkr]

You'll have to come down on your price considerably since there is no warranty.

[aubdeer]

Interesting...I've been looking at the standers. How much for shipping to 24293 commercial location with a loading dock / forklift. Can you take Paypal? Thanks.

Best quote available for LTL is $317.07 to Wise, VA 24293. The picture below shows how the unit would be packaged for shipping. This method allows for a "drive on/drive off" set up. It takes less than 2 minutes to uncrate the mower and have it ready to mow. I can provide an instruction sheet but you will not need it. If you'd like to investigate other shipping options the crate is 66"W x 92L x 52"H and total weight is 1185 lbs but I used our company discount and feel this rate will be extremely hard to beat.


http://i3.photobucket.com/albums/y79/gerdes2003/REP.jpg

[aubdeer]

You'll have to come down on your price considerably since there is no warranty.

I am confident that a $1500 discount off the price of unit would be plenty of service parts if they are even needed. I have been involved with warranty of these machines for nearly a year and have had very few claims for these units!

[aubdeer]

Bump....all questions have been answered

[aubdeer]

thebeans PM sent.

[mowingizbestsport]

How's the cut?

[FERT-TEK]

What part of the midwest are you from? I am typing this from Chicago and might be interested.

[aubdeer]

How's the cut?

The cut on this machine is excellent. The 52" floating deck allows this machine adjusted the cut height from 1.5" to 4.5" extremely easily. I have operated both the EverRide Scorpion and Great Dane Super Surfer, on both machines the cut was great!

[aubdeer]

What part of the midwest are you from? I am typing this from Chicago and might be interested.

I am located in the southeast corner of Nebraska. The drive time to Chicago from my location is right around 8 hours depending on the area of Chicago. If you are interested I am willing to have this machine shipped and can check on a quote if you would like.....

[FERT-TEK]

I am located in the southeast corner of Nebraska. The drive time to Chicago from my location is right around 8 hours depending on the area of Chicago. If you are interested I am willing to have this machine shipped and can check on a quote if you would like.....

No need right now I first need to sell my zero turn and will take my chances that it is stlll available.

[aubdeer]

still up for sale....bump for a new week

[FERT-TEK]

I am located in the southeast corner of Nebraska. The drive time to Chicago from my location is right around 8 hours depending on the area of Chicago. If you are interested I am willing to have this machine shipped and can check on a quote if you would like.....

Please check on shipping for this item for me to the 60103 zip code and curious why no warrantee? The unit appears to be new you would think the motor manufacturer would warrantee it at a minimum.

Regarding the shipping what kind of receiving location is needed, residential, commercial....a loading dock?

[aubdeer]

checking on quote....I will send you a PM as soon as I get all the information

[aubdeer]

PM sent with quote and questions answered.......

[aubdeer]

bump....new week

[Mower For Less]

I am confident that with current interest in the stand-on units that I will not have a problem selling this unit for $5,000.

How is your confidence holding out? :drinkup:

[aubdeer]

Bump....price lowered to $4500

[grassmanak]

4500 sounds about right, maybe a bit high. i was at my dealer here in neberaska, she said they are husqvarna oarnge because they were going to be buying them out and one point. Guess the deal feel through. They sell this unit brand new for 5800

[mcwlandscaping]

If you start having problems with hydros, then that no warranty thing can quickly bit you in the a** with the cost of fixing some of those components and the downtime that goes with it.

[aubdeer]

If you start having problems with hydros, then that no warranty thing can quickly bit you in the a** with the cost of fixing some of those components and the downtime that goes with it.

We have had virually no warranty claims on these units, that why having the warranty shouldn't be much of issue at all....