oil pan gasket change on a kaw fh500v

[subs1000w]

im wondering if theres anything special i need to know before i do this or if its real simple like a briggs also what the tourque specs for it are thanks

[Restrorob]

This should "cover" it, Torque at 9 ft.lbs. first then adjust your wrench to 19 ft.lbs. to finish, Also replace the crank seal while your there and make sure the oil pump drive gear meshes with the crank gear properly before tightening.


http://i107.photobucket.com/albums/m314/Restrorob/FH451500531SumpTorque.jpg