PDA

View Full Version : scalping


MeadowsLawnCare
06-11-2007, 02:49 AM
Ok not sure if this is a question that can be answered without a picture. I have a lawn that has a dececent slope. Ive been mowing it with a 21" and my first time i was probably set at 2.5 inches and i scalped it. So i set it up to 2.75 inches and i did fine. Ive been mowing it top to bottom and diagnal. If i want to try this with a 48" bunton w/b at 3" will i scalp at the top due to mower length? Or do you have any suggestions to not scalp it ( like direction or height?) I dont think i can do the crest of the slope going side to side anyway because it wont make the curve worth a ****. Any help would be appreciated.

Thanks!

Midwest Lawn Services
06-11-2007, 04:23 AM
Pics please!

Your Lawn First
06-11-2007, 11:47 AM
IF you mow it at 3'' it will be fine either way you go.

Stillwater
06-11-2007, 11:55 AM
dude experiment set the hight at like 4 inches and cut and work your way down in settings then you will know at what setting you will scalp