PDA

View Full Version : restorob clutch question


bobby perez
06-22-2007, 03:28 PM
I switched the engines and it started up fine and the safeties all work. The problem I'm having is the clutch wont engage.The wires coming from the regulator ,the box mounted on the mower deck,are 2 yellow wires ,a black, and a red with a yellow stripe on it.then they plug into a harness.Now the harness that plugs into the harness with the wires going into the regulator has a yellow wire THATS the one I cut and spliced.I don,t think thats the one I should of cut,because that one connects to the red and yellow striped wire going into the regulator.I cut THAT yellow wire cause there are 2 yellow wires coming out of the regulator, And I did'nt know which one to splice.Obviously Something is different.Also the wires that plug into the clutch harness are 3 BLUE Wires not a black and a blue.AM I confusing you yet. Please help me out here cause I cant make sense of this. THANKS AGAIN.

Restrorob
06-22-2007, 07:41 PM
AM I confusing you yet.

You gave it a good try, But......naaa, Check your PM's......

bobby perez
06-22-2007, 09:21 PM
I FINALLY GOT IT!!!! Will Give you details later THANK YOU.