PDA

View Full Version : Flywheel/crank shaft movement


nettle360
06-24-2007, 03:37 PM
Should the flywheel/crank shaft be able to move up and down? There's about a 1.5 cm play where my flywheel, on a Tecumseh walker model # LEV100-340037D, doesn't touch the top of the crankcase.

Restrorob
06-24-2007, 05:24 PM
All cranks must move up and down, That's crank end play.

BTW, Yours should be .005" to .027" or .127 to .686 mm.

nettle360
06-24-2007, 11:07 PM
Thank you for the tip.

"It is an easy blessing to have experience.":walking: