View Full Version : Parting out John deere hd75
06-30-2007, 10:03 PM
Im parting out an older model John deere hd75 54 inch floating deck I have One hydro pump that is bad dont have money to fix. Engine is A strong 17 hp kaw that was rebuilt less then 10 hrs ago sorry no pics I dont know how to do that yet.
07-06-2007, 12:25 AM
what do you want for the wheel motor?
07-06-2007, 06:01 PM
I would take $ 900 obo for the whole mower it was a very good mower just had that pump go and it not totaly shot its just slow on the right side. I love the foating deck. and the motor starts right up
07-16-2007, 08:17 PM
I bought an HD45 with 2 Good motors for $875, Trying to get my other wheel motor reboult if I have any luck I will let you know.
07-16-2007, 10:41 PM
Hey that would be great thanks agr682 someone told me there is a rebuild kit I need to check with deere
08-14-2007, 10:18 PM
Anybody have any luck yet finding the wheelmotor/pump for john deere hd75?
09-10-2007, 09:24 PM
I haven't had any luck with the rebuild yet. I am checking with my simplicity dealer to see if the wheel motors are the same. I heard that they sell a rebuild kit for them. have you had any interest in parting yours out? I am thinking about selling my hydro unit and engine.
09-10-2007, 10:34 PM
My dealer has two pump/hydro/wheel motors for 675 each thats 225 off no $ TOhave it done . would sell the whole thing for 600 new tires rebuilt engine new clutch
09-11-2007, 09:16 PM
KJ, The wheel motor form a simplicity zt 14-16hp is the same as the JD unit. Either side will work on your unit. If you can find another right or left wheel motor htey are interchangable. You may have to move two levers to make it work. I took two right side pumps and made one a left to get me going until I find a rebuild kit. My local simplicity dealer is checking on the rebuild kit if he has no luck, I am going straight to eaton.
09-11-2007, 10:41 PM
How much do they cost from simpicity? My dealer quoted 550 each from eaton. John deere 675 but they have 2 yr warranty. If for some reason they dont work from eaton Im told they can not be returned dont know just what dealer told me.
09-14-2007, 06:06 PM
I am only checking on a rebuild kit.
10-09-2007, 03:02 AM
Hey agr682, any luck with the rebuild kit yet? I'm trying to repair a couple of hydro units for hd45/75 mowers. If you find anything helpful let me know. Thanks, MAtt
05-22-2012, 05:24 PM
After reading all your conversations about the HD 75 pumps I got on Jack's Small Engine's web site and found the pump under Simplicity zero turn riders - zt series, found the hydro page, and ordered a seal kit for it. Part #1719442 - $37.15 each. I ordered 2 of them for my HD 75 and hope it works. Earlier today I contacted a hydro shop that is very knowledgeable and he checked and came back that the pumps were obsolete and the manufacturer didn't support this product any longer. I hope to prove him wrong. Jack's usually takes a while to get me parts but I'll let you guys know what happens when they get here.
vBulletin® v3.8.6, Copyright ©2000-2016, Jelsoft Enterprises Ltd.