PDA

View Full Version : bobcat zt223


zlo369
07-08-2007, 07:38 PM
replaced my pto belt ,and now my blades will not engage. THANKS ZLO369

Restrorob
07-08-2007, 09:44 PM
If the old belt snapped/came off it's possible it damaged the clutch wire pig-tail/connector. Check that for starters.

AndreT
07-30-2010, 12:27 PM
Can anyone tell me where I can download a pdf file for the Operator's manual for a 2007 Bobcat ZT223 with a 23 HP Kaw engine. I tried on the Bobcat site but they only provide manuals for their current machines.

Thanks

pugs
07-30-2010, 02:10 PM
Can anyone tell me where I can download a pdf file for the Operator's manual for a 2007 Bobcat ZT223 with a 23 HP Kaw engine. I tried on the Bobcat site but they only provide manuals for their current machines.

Thanks

Go to the parts lookup. Type in your model number. Then click on the Literature tab. There will be service bulletins, operators manual and parts manuals in PDF that you can download. Alot of times the parts and operator manual might be the same book but it will only say parts manual.

AndreT
07-30-2010, 05:34 PM
Thanks PUG, couldn't have found it in a million years without your help.
Much appreciated,
Andre

AndreT
07-30-2010, 05:36 PM
Sorry PUGS, Misspellled your Name!

Shoreline
07-31-2010, 08:47 AM
I would go with a loose/broken connection somewhere in the vicinity of the pto pigtail. good luck