PDA

View Full Version : new engine for walker


ACA L&L
07-12-2007, 09:07 AM
Hello all we have a 99 walker thta needs a new engine. the dealer quted us 2200.00 out the door in the box.. I am trying with no luck to locate a place where we could find a new engine at a lower price. Its a 20 hp kohler v twin. I am unable to get any numbers right now as im home and the mower is at the shop. If any one could send me in the right direction i would really appreciate it. thanks

bahamamills
07-12-2007, 09:44 AM
http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200115274_200115274

Better Link

http://www2.northerntool.com/category/76+280781+766241.htm

MarcSmith
07-12-2007, 09:51 AM
http://www.smallenginewarehouse.com/

have you thought about a long block versus the whole engine....that way you are not buying parts you already have....

Restrorob
07-12-2007, 12:26 PM
Check here; http://www.tulsaenginewarehouse.com/

thecrankshaft
07-12-2007, 02:03 PM
Just make sure the engine you buy will work. Usually the companies listed above aren't very helpful.

Mr Priceless
07-12-2007, 02:44 PM
Check here; http://www.tulsaenginewarehouse.com/

was gonna say the same thing:cool2:

MarcSmith
07-12-2007, 02:47 PM
you need to get all the numbers off of your current engine so you can match it up to the proper engine....there is more to it than horsepower and shaft size....

ACA L&L
07-13-2007, 12:55 AM
thanks fellas. I cant seem to get all the numbers off the engine. smeared, gone whatever the case may be. at any rate ill give it a shot and let ya know how it goes.

fool32696
07-13-2007, 01:03 AM
Small engine warehouse has engines up on ebay for less money than they have listed on their site.

ACA L&L
07-13-2007, 01:07 AM
How would i get the engine i need if the numbers dont match? I know this probably isnt the best question but a little direction would be helpful as the the on e i have is going quickly. The numbers the walker dealer gave me for the rplacement were

pa 64554 if this would help any?

buzzard86
07-14-2007, 04:59 PM
Small engine warehouse has engines up on ebay for less money than they have listed on their site.

Dang, you're right. The engine I just bought two months ago from SEW for my SCAG is $50 less on ebay.

Restrorob
07-14-2007, 08:06 PM
The numbers the walker dealer gave me for the rplacement were pa 64554 if this would help any?


That is the spec. number of your engine, In other words your engine model number is CH20 spec. #64554....

Now, Looking up that number it is superseded with a CH20 spec. #64660. So either spec. number engine is a exact replacement engine for your Walker ZTR. Oh, It did tell me your unit was a ZTR also.

Good Luck with your search.

C.G.Y. Lawnmowing
06-03-2009, 01:14 PM
Did you ever get the engine replaced on your walker? I was looking up the topic on lawnsite and found this thread. I'm in the same boat that you were in a number of years ago. Any help would be appreciated.

VegetiveSteam
06-08-2009, 04:11 PM
If your 64554 number is correct I know where you can buy if for 2000.00 shipping included.