View Full Version : Carb Question
09-02-2001, 05:01 AM
Where can i find walbro carb parts online
model no. wa-229
09-02-2001, 10:26 AM
I find that rebuild kit in my aftermarket parts book. It lists for $8.75. Some aftermarket companies are Stens, Rotory,Silverstreak find a parts store that carries aftermarket and you'll find the kit.
09-02-2001, 11:11 AM
Just do a search on the net for Walbro carb rebuld kits (or something close) and there are a few more.
BUT...Your dealer should be able to get (if he doesn't already have it like he should) easily for no more than $10 or $15.
09-02-2001, 02:25 PM
And heres a link I found: http://www.tsracing.com/store/showprod.cfm?&DID=6&User_ID=142192&st=2570&st2=35654255&st3=-33186499&CATID=34&ObjectGroup_ID=122
kind of long huh? :D
09-02-2001, 09:52 PM
Thanks Guys, I found it!!
Walbro part number for a complete repair kit is K20WAT msrp $7.23, diaphragm kit only is D20WAT msrp $3.79, and the complete carb is a WA299-1 msrp $36.00. Any body that sells Walbro should be able to get these for you.
09-04-2001, 12:29 PM
You will save time and probable headache if you buy a new carb. As Jman has stated it's not much money. Sometimes even after soaking a carb you cant get some pasageways clean. I have switched to buying new carbs when I can rather than rebuilding them.
09-04-2001, 05:46 PM
i think that might be an option now
Why? What are the symptoms and what have you done?
09-04-2001, 11:18 PM
i took it as a demo piece at my small engine repairclass and the instructor who didn't no a dam thing he was doing tore the diaphragm, messed up the needle etc
I would get the full kit then. Did the spring get damaged?
09-07-2001, 03:08 AM
i think that could be ONE of the problems...
vBulletin® v3.8.6, Copyright ©2000-2016, Jelsoft Enterprises Ltd.