PDA

View Full Version : Jd x300 problems...


ikaroback
07-22-2007, 12:25 AM
it won't run unless the choke is engaged. As soon as i release the choke it dies. Any ideas?

thanx

khouse
07-22-2007, 02:31 AM
Main circuit in the carb is dirty. Remove carb, dismantle, spray it out with carb cleaner, blow it out with compressed air, reassemble. Drain fuel tank and add fresh fuel. Replace fuel filter. Start it up.

ikaroback
07-23-2007, 05:42 AM
Khouse,

Thanks for the reply. I'll give it a try in the morning.

Ikaika