PDA

View Full Version : wiring diagram for toro proline 724-z


dustermower
07-23-2007, 09:29 PM
I have an old proline 724-z that I need a wiring diaram for. How might I obtain one. thanks Dustermower

fixer67
07-23-2007, 10:43 PM
See if you can find the model number. It will most likely be a 5 digit number. It will be on a sticker or plate. Also get the serial number. I know you said it is a 724-z but it will not be listed that way in the IPLs. 724-z is the "product name" not the model number

dustermower
08-13-2007, 06:55 PM
I fianally found the model number. All the plates were gone. The model number is 74140. I needed a wiring diagram.
Thanks dustermower.

dustermower
08-13-2007, 07:03 PM
See if you can find the model number. It will most likely be a 5 digit number. It will be on a sticker or plate. Also get the serial number. I know you said it is a 724-z but it will not be listed that way in the IPLs. 724-z is the "product name" not the model number

I fanally found the number all the plates were gone. It is 74140 thanks

Bill Kapaun
08-13-2007, 07:39 PM
Try this link??
https://landscapersolutions.toro.com/portal/server.pt?space=CommunityPage&cached=true&parentname=CommunityPage&parentid=1&in_hi_userid=19462&control=SetCommunity&CommunityID=232&PageID=19524#manualsResultPage

Restrorob
08-13-2007, 08:08 PM
They built your model number unit from 93 to 96, All had the below diagram except 93 which was a different part number and only showed the harness with no color codes.

See if this one looks like yours;


http://i107.photobucket.com/albums/m314/Restrorob/Toro724WireDiagram.jpg


Bill, You posted while I was waiting on my sorry dial-up....:hammerhead:

Bill Kapaun
08-13-2007, 09:15 PM
But Rob! You posted a PICTURE!:)

dustermower
08-15-2007, 08:56 AM
Thanks Bill this is what I needed. Dustermower