PDA

View Full Version : Engine Questions


tallcoopscoach
07-25-2007, 04:10 PM
Which engines can I put into a Toro ZMASTER Z252L 62" Commercial Zero Turn Mower Model #74212? Is there only the one? I know it had a 26hp liquid cooled kawasaki, but I'm wondering if others can be put into it and which? Also, where would a find a good used one? ARe there sights with used ones that are reliable...? I can't find any on ebay yet.

J&R Landscaping
07-25-2007, 05:51 PM
If your gonna be using it daily, I personally would not trust a used engine. You should be able to slap a regualar 23-25hp kawasaki on it but it's going to require some mods to your wiring harness, or your going to need a standard air cooled engine harness (about $65-$90) from your dealer.

Restrorob
07-25-2007, 07:03 PM
I'm with Joe, Buy new and have a warranty. There's no telling how a used one has been treated or how long it would last.

You can gander around here;

http://www.smallenginewarehouse.com/ProductList.asp?Category=Engine&Supplier=Kawasaki

Restrorob
07-25-2007, 07:25 PM
After looking up your model number that unit was only made in 99 and 2000 and came with a 22 hp FD661D engine. The service manual list this engine at 20 hp @ 3600 rpm. Possibly someone replaced the engine at some point ?

So, A 23 hp or up air cooled would be a up-grade on this unit.