The biggest youve fit on a 5x10 trailer???

[stevenf]

Right now I have a 44 inch ZTR rider that fits ok. Really dumb not getting the 6x10 but to late now....
59 inches of clearence. Just curious as to how big you guy shave gone on a 5ft width....

[DillonsLawnCare]

i get my 52" on a 5' trailer!

[nmez21]

Exmark has a few 56" models out.

[stevenf]

Im just wondering what yall have fit on them. If i had a 56inch mower, I would have 1.5 inch clearence on each side of the mower. dont know how well that would work out.......

[YoungGun]

I put My 52'' and 33'' on a 5' by 10' and it was a peice of **** trailer---- now i have a 6-12

[daveintoledo]

that is not part of the measurment, a 50 inch mower with a chute, is wider then 50 inches..

[DSLND]

I fit a 52" Toro ZTR, 36" Toro WB, 21" Toro and all my handheld stuff. I had to put the 21" on top of the 36" but i only took all that stuff for one day. I have a Toro 36" WB T-bar is anyone is interested, i will trade for a pistol grip toro 36". -Mitch-

[Supper Grassy]

I fit a 52" Toro ZTR, 36" Toro WB, 21" Toro and all my handheld stuff. I had to put the 21" on top of the 36" but i only took all that stuff for one day. I have a Toro 36" WB T-bar is anyone is interested, i will trade for a pistol grip toro 36". -Mitch-

that pretty good the 21 on the 36

[Americal Vet]

I've put my 52" JD-680 on a 5 by 10, but I did have the chute up... and even at that it was a tight, tight fit. Have to be a fairly good operator. I bought the trailer a few years ago to haul a 48" Craftsman garden tractor, and sometimes a golf cart.

After I retired due to some old "souveniers" from Vietnam, I bought me a larger trailer to haul my present equipment. I would suggest nothing less than a 6x12 for this type of business.

[Guzman Properties]

that pretty good the 21 on the 36

No wonder he wants to trade the 36 WB, it has too many dents and scratches!!!

[Vikings]

I would suggest nothing less than a 6x12 for this type of business.
I agree.

I have little experience but my first trailer is 5x10 and it's an awkward size. If it was at least 6 ft wide I could fit a 36" and a 21" side by side, I can't do that on my 5ft wide trailer.

Also if it was 12 ft. long I could put two 36"s, one behind the other, I can't do that on the 10 ft length of the trailer (at least I don't think so, the tail ramp would be in the way.)

[stuffdeer]

I have a 52" Bobcat Z on my trailer right now. Fits fine.

I usually hav either a 50" Cub or 44" Cub.

[Supper Grassy]

I have a 52" Bobcat Z on my trailer right now. Fits fine.

I usually hav either a 50" Cub or 44" Cub.

Stuffdeer
this is off topic but lets see an updated pic in your sig

[lawnman_scott]

Im just wondering what yall have fit on them. If i had a 56inch mower, I would have 1.5 inch clearence on each side of the mower. dont know how well that would work out.......What would be the problem?