PDA

View Full Version : tranny slipping


Doug Perrone
09-04-2001, 10:25 PM
Can anyone tell me how to adjust the tranny on my Scag W/B. Its belt driven and when you go it comes to almost a complete stop then goes again. i think it needs to be adjusted but dont know how.

Robert Doubrava
09-04-2001, 11:03 PM
i'm not sure where it would be, but try tightening the belt tensioner screw or bolt,if the belt is loose.to adjust it, turn the screw or bolt clockwise to tighten it. that should help. :blob3:

khouse
09-04-2001, 11:05 PM
when it slows to almost a stop does the belt/s look like they are slowing down at the same rate?

Dave
09-05-2001, 06:03 AM
does this do it in all speeds or just one,It would not supprise me that the shift keys are worn and the gears are slipping by them

Brian Turnage
09-14-2001, 11:24 AM
Don't know if you've fixed it yet. Check bottom belt, not side belts, belt from engine to input of trans. is probably loose, or, input pulley is wallowed out along w/the woodruff key.

lawrence stone
09-14-2001, 10:15 PM
!

edward hedrick
09-23-2001, 08:35 PM
Check the belt from eng to trans if loose move the idler to tighten