PDA

View Full Version : Dead Walker 26hp


greenscapestm
08-16-2007, 09:01 PM
I have a 26hp walker that threw a rod today.... just doesnt run the same on 1cyl. what am i looking at cost wise to repair/replace the enginge, whats it worth as-is? any help would be great

Restrorob
08-16-2007, 09:55 PM
You can check here for a replacement engine;


http://www.smallenginewarehouse.com/

lifetree
08-16-2007, 10:13 PM
How old is the machine ?? Maybe still under warranty ??

greenscapestm
08-16-2007, 10:31 PM
its a couple years old anyone know what engine it is i see only two on the above site for a 26hp kohler engine a vertical and horizontal cant tell by the pic which one it is neither one looks exact

Restrorob
08-16-2007, 10:37 PM
If you will call their 800 number with your engine model and spec. numbers they will be happy to help.....They also state pictures may not be the exact item.

greenscapestm
08-16-2007, 11:17 PM
how hard/easy is it to swap out an engine? I am mechanically inclined swapped the engine in my truck before, not messed with small engines much though.

Restrorob
08-17-2007, 06:12 PM
If you have replaced the engine in your truck you can handle this little mower engine.

Word of advice;

Before starting take pictures, Close-ups all the way around the engine. They could come in handy on re-assembly.....

thecrankshaft
08-18-2007, 07:28 PM
Walker uses horizontal shafts - your engine is a CH26S. Get the spec number off of the blower housing.

For EFI, I would go long block from Kohler instead of buying all the EFI parts again.