Graphite Based Coating

[kdt64]

Has any one used "Ez-Slide" under their mower decks to reduce grass build up. I bought a can at TSC to try it out on my mower and was wondering how great does it do.

[Drew Gemma]

let me know if it works

[carcrz]

It works. Make sure everything is perfectly clean. Apply it just like you would an auto paint. No grease, dirt, etc...

[kdt64]

I cleaned it as much as I could, I hope it was enough. I have a Husqvarna tractor with a 54 deck that is like a grass magnet, after two times of lawn mowing the deck is compleatly clogged. If this works it would be a life saver.
I have a smaller mower that I am trying the Fluid Film on, I will let you know how it turns out.

[bfstrider]

I tried it a while back. Did not last long. There were spots that stayed on, but for the most part it wore off with about a half a dozen 1/2 acre properties mowed. In my opinion use Fluid Film. It makes the grass that does stick easier to remove. There is not a cure all for no grass sticking to your deck. Fluid Film will also keep your deck from rusting.

[DanielC]

So where does a person get Fluid film or some teflon based sealant for your deck,sounds pretty cool.

[kdt64]

When I was spraying it on I was wondering how long it would last, when it starts to wear off I will replace it or something else, which probably will be Fluid Film. To DanielC question, Fluid Film is a sponsor on Lawnsite. Just before you came in this section there is a Fluid Film icon you can click to get to there page, the reps name is nice fellow called Dan Williams. Contact him and he will send you a tester can free.

[DanielC]

Thks for the info.,I'll give it a try.