PDA

View Full Version : double blades

Sweet Tater
10-14-2007, 10:05 PM
I have a 48" lazer z, what do you think about double blading , high lift on the bottom and gators on top?
Sweet Tater
10-16-2007, 04:19 PM
no comments? If it works and won't tear up my mower I'd like to try.
John Gamba
10-16-2007, 04:35 PM
I have a 48" lazer z, what do you think about double blading , high lift on the bottom and gators on top?


There not going to recommend doing that.What size engine do you have?
Sweet Tater
10-16-2007, 09:08 PM
23 hp ... briggs I think
MikeLT1Z28
10-16-2007, 09:19 PM
exmark usually doesn't recommend running doubles on anything they build. i've done it before when i had one, two fairly dull sets of blades seems to cut about like one sharp set. the velocity of the discharge is a lot more too, seems to make a big mess to me.
KathysLGC
10-16-2007, 09:33 PM
Well first off what don't you like about the single blade set-up?
John Gamba
10-17-2007, 06:16 AM
23 hp ... briggs I think


You ether have a 60" try deck on a ct or you have a 48" try with the 18hp briggs???
Sweet Tater
10-18-2007, 12:36 AM
na. its a 48" with a 23hp might not be a briggs, I'll have to look again, But it is 48/23
as for what I don't like about the single blade action, just wanted to seeabout a better cut with less clumping, gator blades just aint satifactory.
John Gamba
10-18-2007, 07:29 AM
na. its a 48" with a 23hp might not be a briggs, I'll have to look again, But it is 48/23
as for what I don't like about the single blade action, just wanted to seeabout a better cut with less clumping, gator blades just aint satifactory.


I have found on the tyr deck that the notched high lifts where great all the time.