PDA

View Full Version : PGP:Shattered pgp.Still works?


CAPT Stream Rotar
11-03-2007, 12:37 PM
Well since i was doing the blow out I'm not sure if the head was still working..It was on a driveway/street zone.I had to grab the camera for this...

From what I observed, the pgp was still in its working order.Still turning a 180'.
Nozzle looked intact...

take it fwiw....

http://i116.photobucket.com/albums/o16/windoraphan/2.jpg

http://i116.photobucket.com/albums/o16/windoraphan/1.jpg

CAPT Stream Rotar
11-03-2007, 03:01 PM
pgp=takes a licking....and keeps on ticking.

FIMCO-MEISTER
11-03-2007, 03:08 PM
Are you blowing it out CSR? I've see some beat up PGPs still working. What gets them yanked by me is leaking seals and when they quit going down.

Rotor_Tool
11-03-2007, 03:14 PM
pgp=takes a licking....and keeps on ticking.

I have seen lots of those with the turrets all chewed up by edgers, trimmers, and mowers. They keep going and going and going...you know the rest of the story.

Rotor_Tool
11-03-2007, 03:20 PM
Well since i was doing the blow out I'm not sure if the head was still working..It was on a driveway/street zone.I had to grab the camera for this...

From what I observed, the pgp was still in its working order.Still turning a 180'.
Nozzle looked intact...

take it fwiw....

http://i116.photobucket.com/albums/o16/windoraphan/2.jpg

http://i116.photobucket.com/albums/o16/windoraphan/1.jpg

I have been away for a few weeks so I haven't been following the CSR saga. Are you moving down south for the winter?

Mike Leary
11-03-2007, 05:22 PM
We just blew two of our big boys..both have I-20 Ultra 6" stainless heads,
problem zero..that's about a 150 heads. Not bad performance, I'd say.:cool2:

londonrain
11-03-2007, 06:29 PM
Cut the top off a I-20 like that and 99% of the time you will have no flow because of the flow stop mechanism.

Mike Leary
11-03-2007, 06:31 PM
Cut the top off a I-20 like that and 99% of the time you will have no flow because of the flow stop mechanism.

At least you're not flooding!:laugh: Lot to be said for spring start up..check the heads in advance
of the mowers for height.