PDA

View Full Version : meyer MD2 & EZ mount plus plows


supercuts
01-29-2008, 02:35 PM
wondering if anyone using the MD2 plow wanted to upgrade to the EZ plus setup? my older truck has the MD2, new truck has the EZ plus. what a difference, no more pulling my back out trying to wedge the lower pins like on the MD2. the problem is, i still have the old truck/plow setup and its still in use. now that i have the new one, i cant stand the old one.

point of this tread, i was looking into buying new lift frame and frame mount to swap out on my old unit. it was like $800 and clearly not worth it. looking the two plows over, i think all you need is the mount for under the truck with the 2 pin set up (wedge on teh bottom). then, by the looks of things, simply leave the lower blue pins on the MD2 in and it will work exactly like the EZ plus system. when i get off my butt ill go out and try it and verify if it works, but looks like it should. after that, simply use the 2 top blue pins as if it was the EZ plus.

PlatinumLandCon
01-29-2008, 02:56 PM
www.plowsite.com