PDA

View Full Version : Briggs 4hp Governor Spring (s) Linkage Question


WJW Lawn
01-29-2008, 08:35 PM
Hey guys...my neighbor was tinkering with his push mower and broke the governor springs off his throttle. He wants my help, but I want to check and make sure the linkage is right so his muffler doesn't glow in the dark. The model # is 11B 544C062 (4hp Briggs Quatro) Does anyone have a diagram?

I know it has two springs, and the flywheel blows the sail to open the throttle, but Id feel better about knowing the correct linkage before I mess with it. Thanks guys!

WJW Lawn
01-29-2008, 08:46 PM
Wait...lol model # 10A902 2189

Restrorob
01-29-2008, 08:52 PM
Wait...lol model # 10A902 2189

NOW I have something to work with.....:clapping:

Back shortly.....

Restrorob
01-29-2008, 09:07 PM
Both springs hook to the eye in the link rod, The smaller spring is governed idle and goes closer to the flywheel cover.


http://i107.photobucket.com/albums/m314/Restrorob/Briggs/Briggs10A902ThrottleControl.jpg

WJW Lawn
01-30-2008, 05:38 AM
Thats it! Thank you Thank you!