View Full Version : velky for exmark 32
lil_cote_93
02-08-2008, 02:42 PM
Is it possible to attach a velky to a 32 inch exmark
The other thing i was wondering, is it alright if you dont have hydro?
I am only 130 lbs, so dont think it will be bad on the tranny.
what you think? should i just walk it out?
lil_cote_93
02-08-2008, 06:59 PM
i dont even know where to buy the attachment for it.... Need some help ppl
ed2hess
02-08-2008, 09:04 PM
Well we bought an exmark from our dealer....it is the one wheel type. I think it was around $300.
I had a exmark 32 belt drive and it pulled me around
Roger
02-08-2008, 09:39 PM
For a small mower, not very heavy and small footprint, the one-wheeled Velke is probably the best choice.
http://www.powerequipmentwarehouse.com/velkestandup1wheelsulkyred-p-1492.html?cPath=215
A two-wheeled sulky, Velke or some other brand, may have a too wide of wheel spread for a 32" wide mower.
Runner
02-09-2008, 02:40 PM
Go with a two wheeled. It will have alot less drag, as it will be lighter on the grass. It will also not leave the center line. This is not to mention that a two wheeled is much more comfortable, as there is more leg and foot room to move around on. This is alot easier on the knees.
P.S. ...make sure you go with a trailering type, as your mower will not swing a solid mount around. These are all over ebay, and there are some supply houses that sell some decent ones fore around 200 bucks, I think.
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.