View Full Version : help the old briggs
Green Care
11-05-2001, 10:14 PM
5HP Vac attachment, would not run at full throttle.
It barely run at slow speed but when moving the throttle
to the fast position it cut offf. any suggestions?????????/
vipermanz
11-06-2001, 02:59 AM
probably running too lean , unscrew the adjust screw on the carb 1/2 turn out and try that
Robert Doubrava
11-06-2001, 12:37 PM
like vipermanz said, it is most likely a carb problem. adjust it. does it smoke black? if so, it is getting too much fuel in to the carb.
vipermanz
11-08-2001, 05:22 PM
anything happen?
Green Care
11-08-2001, 06:45 PM
Today I got to adjust the carb everything is OK runs strong.
thank,s for support.
Robert Doubrava
11-08-2001, 07:34 PM
thats good. glad to help.
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.