advice on a mini

[oakhillslandscaping]

hey guys im looking for some advice on a mini that im looking at its a 2004 cat 304cr, has a thumb, spade bucket, the wear on the tracks is heavy they are prolly at 55% i ran it today, it was not bad, it has 2146 hours on it couple dings and dents but thats not a big deal to me, they are asking 32,500 which seemed high to me not out of my range i just think i can get something for a better price

[oakhillslandscaping]

here is a picture of it

[ksss]

hey guys im looking for some advice on a mini that im looking at its a 2004 cat 304cr, has a thumb, spade bucket, the wear on the tracks is heavy they are prolly at 55% i ran it today, it was not bad, it has 2146 hours on it couple dings and dents but thats not a big deal to me, they are asking 32,500 which seemed high to me not out of my range i just think i can get something for a better price

http://www.ironplanet.com/jsp/s/item/164551?h=400%2CbyAuctionResults%2F2%2CModUserView


http://www.ironplanet.com/jsp/s/item/163568?h=400%2CbyAuctionResults%2F2%2CModUserView


http://www.ironplanet.com/jsp/s/item/163560?h=400%2CbyAuctionResults%2F2%2CModUserView


Your suspicions are correct. Way too much for a machine in that condition.

30K can buy a lot of mini excavator on the used market.

[jk landscape]

U may also want to check out catused.com

[mrsops]

hey guys im looking for some advice on a mini that im looking at its a 2004 cat 304cr, has a thumb, spade bucket, the wear on the tracks is heavy they are prolly at 55% i ran it today, it was not bad, it has 2146 hours on it couple dings and dents but thats not a big deal to me, they are asking 32,500 which seemed high to me not out of my range i just think i can get something for a better price

OAKHILL IM SELLING MY 341 BOBCAT EX IF YOUR INTERESTED SEND ME YOUR EMAIL ADDRESS AND I WILL SEND YOU ALL THE INFO

[Scag48]

That price is way too high.

[icex]

$32,500 for that? HAHA. I can get a used one with 500 hours or so for $28,000. But 2146 hours? Way to many hours for that price.. I'd look elsewere

[BIGBEN2004]

Yea way too much and too many hours. For not a whole lot more you could go brand new with warranty and better financing.

[J. Peterson Grading]

New here and first post.

I think thats way to much for that machine. They are trying to get you to buy the CAT name not the machine. If that makes since?

J.

[oakhillslandscaping]

well i found the same machine, same price, but it has 1,000 less hours and it has not dents brand new tracks and a radio, all around better machine for the same price, im going to put my link belt on consignment at the place that has the machine shown above, and then make a purchase once my link belt sells, thanks for the advice im glad i shopped around and didnt jump