PDA

View Full Version : Parts for a Pump


mowermankevin
03-23-2008, 05:38 PM
Do these part numbers mean anything to anybody? I'm going to print them as they are on this pressure washer: Pump Prap84434 O.L.3207316 6516/8064 0005 101003 MTPV 8443 191693 This is a little Briggs & Stratton M#020206 Rev#00 (?) Type 4100CP S#1009684665 G.P.M. 2 P.S.I. 2050 Where the fresh water input stem goes into the middle of the pump the stem is half inch threaded into the pump body but it looks like it was pressed in and stripped the threads at 12 & 6 O'clock position, any good sites for pump parts would be appreciated, thanks Y'all

FCPWLLC
03-23-2008, 06:42 PM
2 gpm and 2050 psi.... That's more of a candidate for throw away. Cost so little to replace rather than fix. But here are a couple places to call... http://www.pressuretek.com or http://www.southside-equipment.com/

mowermankevin
03-24-2008, 01:28 AM
That's kinda what I was thinking, it's a neighbors pump and I told him if I can't find parts without driving around,to scrap it. Thanks for the info.