PDA

View Full Version : Softball Batters Box


DDAF
04-02-2008, 11:25 PM
I think I have an umpire that just doesn’t want to call anyone out of the batters box. Before the game starts he marks out the front line of the box then tells me that my box is wrong. The box is 3’ x 7’ and is 6” off the plate. The foul line connects at the front corner of the box. The umpire said that the foul line should connect on the side of the box.

Looking for help or comments.
NFHS Rules Their drawing shows it connecting at the side, but when I lay it out, it always connects at the corner.

Thanks in advance.

jmoore16135
04-03-2008, 01:20 AM
Below is a diagram of a softball batters box. Drawn in is the fair line if it were started at home plate. It shows that the fair line does intersect the batters box on the side of the side.

DDAF
04-03-2008, 08:21 AM
Thanks, I have the same diagram but when I change the diagram lines to a 4” line it changes everything.

MarcSmith
04-03-2008, 08:53 AM
gotta rembemer that when you do any lines, if I remember correctly, the outside edge of the lines is your box. that way your striping is inside the box.

Rtom45
04-03-2008, 10:29 AM
If your lines are not laying out correctly, you may also need to double check to location of the bases. If you start your line at the point of home, and run it to first and third, the line won't cut the corner of batter's box. If it does, either your box is laid down incorrectly or your bases are out of position.

beaglegun
04-03-2008, 03:21 PM
A softball batter's box is way differant then baseball. There is more of the box in front of the plate then behind. 4' to the front from the back corner. 3' to the back from the back corner.

cutsit
04-10-2008, 12:36 PM
Each sanction has a diagram of the home plate area in their rule book.

I haven't checked to see if ASA and USSSA are the same. The USSSA rule book is on line at www.usssa.com. ASA doesn't have the book on line but provides a copy to each manager when they sign up each year. Maybe someone can give you a copy.

packey
04-15-2008, 02:00 PM
or just get ahold of the umpire and politely ask him if he has a copy of the diagram so that you can get it right. Officals love it when you make them feel like they have the answers. However the diagram that was given is right as far as I remember.