PDA

View Full Version : toro 455-d


Espacesverts
04-12-2008, 05:48 PM
Hi!

I finally put on the deck and the cylinders are working fine. I now have an other problem...My wings don't want to lift more than 4 inches. After that I have to help a little bit the deck with my hands and the deck lift by itself.

Is somebody here know what I should do???
My cylinders are brand new so It can't be that.

Thanks!

crawford_d
05-07-2008, 02:40 PM
Have you checked all the various relief pressures. The book has a number of checks that need to be run in order to know if your working with the needed pressures.

Dtoms
05-07-2008, 08:57 PM
Check the hyd. hose coupler ends from the deck to the traction unit. Over time the coupler balls wear into the ends. Try to lift the deck and push or rotate the hyd. hose to see if it makes it lift or not.


Good Luck