PDA

View Full Version : Proline 44


Jeff Cody
04-12-2008, 05:12 PM
Not getting power to my clutch that engages blades . Was working great last season , but now am not getting power to it. Ohm'ed the engagement switch,OK, also the safety bar switch,OK,
Would anyone have a wiring schematic on this machine, or any suggestions?
model #3G185-20237
Any help would be greatly appreciated.
Thanks in advance
Lilman

ffemt1271
04-12-2008, 05:14 PM
undo the wire right at the clutch and see if your getting power there, if so it may be the clutch

Jeff Cody
04-13-2008, 07:48 AM
I did , but am getting no power to the clutch.
Thanks for the reply
Lilman

FIXDISS
04-13-2008, 08:03 AM
Did you check for a blown fuse.