PDA

View Full Version : Huskee Fuse


lgbgen
04-24-2008, 07:23 PM
I have a Huskee Model13A0673G131 15.5 HP. I am having an electrical problem but have not been able to find the physical location of the fuse on this mower. Would some kind soul give me a hint where the fuse is located?

Thanks Larry

jkason
04-25-2008, 03:23 PM
Huskee is built by MTD (usually).

MTD puts the fuse on a thin-guage red wire near the solenoid.
If this thing has a "step-through" frame, you're going to need to get to the underside to even see it.
If it has a "box" frame, the cover that is between your legs usually is removable.

lgbgen
04-25-2008, 04:12 PM
Huskee is built by MTD (usually).

MTD puts the fuse on a thin-guage red wire near the solenoid.
If this thing has a "step-through" frame, you're going to need to get to the underside to even see it.
If it has a "box" frame, the cover that is between your legs usually is removable.
Thanks jkason. I will take that cover off this weekend and see what I can find. Larry