PDA

View Full Version : John Deere 4430


SouthernLandworks
04-27-2008, 04:52 PM
I was bailing hay yesterday with my 4430. I noticed smoke coming from the dash so I parked it. Took the dash cover off and noticed that the ignition were the wires connect was burnt. I was running my bale monitor, AC, and radio, could it be too much on the wiring???? Would a new ignition fix my problem??? Any Ideas???
Thanks

mountainlake
04-27-2008, 06:15 PM
Could have just been a loose wire at the switch, put a new one in run it a little and check the wires for getting hot. If they are getting to hot then it's some other trouble. Steve