PDA

View Full Version : Tecumseh Carb Issue


gorper99
05-15-2008, 03:48 PM
I have a Toro 2-cycle SB that was given to me.Did not run last year.Upon checking the carb,there appears to be a line missing?One fitting is for fuel intake,another is for primer but right behind the fuel intake fitting on carb is another very small fitting.Looks line something would go on there.Or is it just a breather/vent?When I prime it,gas comes out of the fitting?Engine #Tec. HSK635 type 1723A.

Restrorob
05-15-2008, 07:27 PM
I'm not up on these 2 strokers but you can download a service manual below that should tell you anything you need to know.


http://www.cpdonline.com/692508.pdf


Good Luck

gorper99
05-15-2008, 11:09 PM
Service manual does not have pictures of what hooks where?

topsites
05-16-2008, 11:04 AM
More than likely if it ran before it sat your problem lies elsewhere.
I would pull the bowl and do a float and main jet cleaning.