PDA

View Full Version : Wright Stander 4 Sale


newlooklandscp
05-24-2008, 07:16 PM
Stupid Typo in the Title, repeat.

48" Wright Stander for Sale.

About 1200 hours total on the entire unit but the motor was replaced last July with a NEW 17hp KAW. The motor maybe has 200 hours max on it. Starts on the First Pull all the time. New Motor was used the unit July-end of october then stored and is used on occasion (and I mean once a week for a few hours) since May 1st this year. No need for the machine anymore.

Spring Service:
Hydro Oil Changed
Air Filter & Pre-Filter
Oil Change & Filter
Belts Adjusted
New Front Tires
New Tension Pully
Serviced Regularly

Also Included:
Many, Many Blades (Gator, Straight, & High-lift)
1 year old Jumbo Grass Bag for additional $100.00 or Free Older Jumbo Bag (your choice)

Asking $2000.00

PM or call the office 847-814-3001

White Gardens
05-25-2008, 03:35 PM
I'm interested, what kind of condition is the spindles on the deck, pullies, belts, ect.

Also how often did you service/ lube these components.

newlooklandscp
05-25-2008, 05:00 PM
Belts were all new middle of last season. The tension pulley is brand new, about a month ago. I personally grease the machines once a week on Wednesday mornings before we start. Hydro fluid is and was changed in spring right before we start. Oil is changed every 3 weeks since I cut only 4 days a week. My guys check the oil every morning before the start the machines. The spindles are original and cut decent for the age of the machine. If you plan on cutting all week with the machine you may want to swap them out. Not a huge change but takes a few hours.

Ken

zurfsturfcare
05-26-2008, 01:22 AM
could u post some pics?

newlooklandscp
05-26-2008, 02:04 AM
ya no problem. I am taking pictures tomorrow. They should be up sometime late tomorrow or Tuesday.

newlooklandscp
05-28-2008, 12:43 AM
Pictures you guys asked for:

olde_blue
05-29-2008, 11:44 PM
A few questions:

What is the serial number? Year?

Have the spindle pulleys' been swapped out for higher blade tip speed (or is new enough that the blades are 19,000 fpm)?

Are the spindles sealed, or greasable?

And, if you have time, could you provide a picture from the rear (and of the hydro pumps)?

Thanks.

Danielslawnservice
05-30-2008, 05:38 PM
DIDO im going to be buying one of these soon and well if its good enough than i'll buy it

mowingmachine93
05-30-2008, 05:48 PM
Would you ship to 66048?

newlooklandscp
05-30-2008, 07:11 PM
A few questions:

What is the serial number? Year?
I will pull the serial number tomorrow. The machine is 6 years old.


Have the spindle pulleys' been swapped out for higher blade tip speed (or is new enough that the blades are 19,000 fpm)?
Spindles have not been replaced since I have had the machine (3 yrs now). I would have to say spindles are original.


Are the spindles sealed, or greasable?
Greasable. My 52" stander that is two years old has sealed. Wright started that a few years back.

And, if you have time, could you provide a picture from the rear (and of the hydro pumps)?
Yup will do that tomorrow, same time I post the serial number.

any further questions feel free to call my cell 847-814-3001.

Yes I can ship, it would be ABF and I can get a quote in a day or two when I am free to call it in. I would say a few hundred bucks as a guess.

Ken

newlooklandscp
06-01-2008, 09:21 PM
Ok here are the pictures of the hydro-pumps and rear. Actual hours are 1238.4

Model: WS-4817KAW
Serial #: 11478

Any questions let me know. Willing to bring price down a little just so I dont have to look at the machine all summer.

Danielslawnservice
06-02-2008, 12:34 AM
this is a great looking tool hope it goes i just bought a Sentar Sport and its coming in wed/ thurs im going to love it!!!

mikefuhr
06-02-2008, 11:14 PM
LET ME KNOW SO WE CAN TALK ABOUT THIS MORE CAUSE I AM VERY INTERESTED. THIS IS WHAT I HAVE BEEN LOOKING FOR

edit - you can't post an email address at the site. Thanks, Mike

newlooklandscp
06-06-2008, 09:35 PM
$1750.00 ...... anyone?

newlooklandscp
07-02-2008, 10:04 PM
bump bump ... ba bump

Honey Do Property Mgmt.
07-02-2008, 10:54 PM
Im interested in the stander give me a call at 419-330-9694

ATouchofGrass
07-02-2008, 11:04 PM
Any leaks in the hydros, are they Responsive?

MJS
07-02-2008, 11:13 PM
$1750.00 ...... anyone?

Oooh, I have been looking at getting one of these for a while now. . .

So you're saying the actual engine hours are only 200 approx right now, but the rest of the unit is 1200?

How far are you from St. Louis? I would consider picking it up, were I to buy it.

And. . . would you go any lower on the price? Just checking :walking:

huskres
07-03-2008, 07:50 PM
id do it for 1500 if you could meet me in st louis :D

newlooklandscp
07-11-2008, 12:16 AM
I am about 5hrs from STL. I am right outside of O'Hare Airport. Give me a ring if interest.

Also ya I can do a bit better on the price.

I can also ship to OK if you pay for the shipping.

Office 847-451-0129

newlooklandscp
08-02-2008, 12:18 AM
Last Chance before EBAY!

LunarLandscape
08-02-2008, 04:37 PM
what kind of price are you looking at now for the whole package, bagger ect. . I am in des Plaines. If your price is right I will pick the machine up Sunday. Thanks

Marvelous Gardens
08-02-2008, 04:54 PM
What is shipping cost to 77979.

newlooklandscp
08-03-2008, 12:11 AM
Lunar,

I am asking $1750.00 - machine and bag. If you would like to come take a look just call the office or PM me. I should be around all weekend.

Marvelous,
I will check on the shipping on Monday. I am going to guess ..... but don't quote me $300-400. Will get an exact price and PM you then.

Ken

newlooklandscp
08-18-2008, 07:59 PM
Unit is Sold