PDA

View Full Version : Stander modification


Morningside
06-09-2008, 06:27 PM
I have a 36" rapid height stander and i was wondering if i could put a sentar seat on it. someone told me that the frames are the same (stander rh/ sentar sport) however i am not sure. that is why i am asking. i love the stander and will continue to use it as is. sometimes i would like to sit without having to unload my rider.

WrightCommercial
06-10-2008, 08:40 AM
Morningside,

The two frames are very similar but the part on the Sport to attach the seat is not on the battery box on the RH. It might be possible to purchase the full size Sentar seat assembly and fabricate attachment points onto the RH battery box. The seat assembly on the Sport is basically 2/3's of the full size Sentar assembly, so it is missing a lower attachment piece. The full size Sentar assembly has the lower piece for bolting it on the unit you would just have to fabricate brackets to attach it to the battery box.

Best Regards
Wright Mfg. Service Department

olde_blue
06-13-2008, 01:20 PM
Don't forget that the upright assembly on the Stander RH is taller than the Sentar Sport, so the egronomics may be off on your conversion.