PDA

View Full Version : Hustler Super Z 60"


BryceBentleyLCS
06-10-2008, 01:29 AM
I am selling my 2007 Hustler Super Z 60" with 25 Hp Kaw. I bought the mower in December 2007. The warrenty didnt start until March of this year. The mower has been great and cut is wonderful! Currently the mower has 65 hours. I have added flex forks and a Discharge block off plate. I am located just south of Lexington Kentucky. The reason that I am selling is to buy a smaller mower. The 60" is just too wide for the lawns. I need a 52 and under. I am asking 6700.00, Thanks for looking :usflag:
http://www.lawnsite.com/attachment.php?attachmentid=108276&stc=1&d=1210205849
http://www.lawnsite.com/attachment.php?attachmentid=108280&stc=1&d=1210205976
http://www.lawnsite.com/attachment.php?attachmentid=110830&stc=1&d=1212638189

02DURAMAX
06-10-2008, 01:43 AM
Would You BE interested in a stander?

BryceBentleyLCS
06-10-2008, 01:58 AM
No sorry, I forgot to say no trades. :usflag:

BryceBentleyLCS
06-10-2008, 04:09 PM
Price drop ......6500.00 I need to sell soon. Thanks :usflag:

fool32696
06-10-2008, 07:04 PM
where was this deal last year?

zemzabob
06-10-2008, 07:13 PM
Damn I wish I had the money. Anybody want to buy $6,500 worth of guns from me?

kjslawn
06-10-2008, 08:19 PM
Man I wish you would take a trade I have smaller mowers. That thing is sweet

BryceBentleyLCS
06-10-2008, 10:18 PM
Opening up to some trades. John Deere 7h19 54" or Hustler Trimstar 48" or Ferris comfort DD or Scag Hydro 48" or 54" All new or 2007 with Boot.:usflag:

kyfireman2004
06-10-2008, 11:12 PM
Bryce
I am also looking to buy a smaller unit..........I think i am leaning towards the emark 46 hp.
Central equipment said they are on sale for 6300.....but the dealer in somerset has them for 5999.00
Lou

kyfireman2004
06-10-2008, 11:13 PM
sorry........exmark 46 hp

BryceBentleyLCS
06-10-2008, 11:25 PM
Bryce
I am also looking to buy a smaller unit..........I think i am leaning towards the emark 46 hp.
Central equipment said they are on sale for 6300.....but the dealer in somerset has them for 5999.00
Lou

Hey Lou,
That sounds good. 5999.00 is a good price. I am going to check into that. Is the dealer called K & T saw shop in Somerset? Ya need a smaller mower for this community that I picked up this year. The 60" is to big to fit into alot of areas. Thanks again :usflag:

bluetick
06-11-2008, 05:47 AM
I'll swap you a 54" super z. a little over 200hr on it.

BryceBentleyLCS
06-11-2008, 06:30 PM
Ok Bottom Dollar 6200.00 That is the final Price if :usflag:

BryceBentleyLCS
06-11-2008, 07:28 PM
Would You BE interested in a stander?

PM you about the walk behind
:usflag:

zurfsturfcare
06-11-2008, 11:19 PM
i have a 48" trimstar hydro with 220 hours, bought new last spring

BryceBentleyLCS
06-11-2008, 11:21 PM
i have a 48" trimstar hydro with 220 hours, bought new last spring

Got some pics?

bigw
06-11-2008, 11:23 PM
you get it to PA. and ill give you $6200 right now!

BryceBentleyLCS
06-11-2008, 11:24 PM
you get it to PA. and ill give you $6200 right now!

Where in PA

bigw
06-11-2008, 11:25 PM
Where in PA

Telford,which is about 25-30 miles north of phila

BryceBentleyLCS
06-11-2008, 11:29 PM
Telford,which is about 25-30 miles north of phila

WOW 673 mile one way. That 400.00 in Diesel round trip! Ouch

BryceBentleyLCS
06-11-2008, 11:34 PM
PM sent Big W

bigw
06-11-2008, 11:35 PM
WOW 673 mile one way. That 400.00 in Diesel round trip! Ouch

lol i know,i was thinking if youd like id give you 5,000 and a brand new quick 36 superduty with 34 hrs on it if that would be of intrest to you? I dont use the quick that much and am getting ready to buy another 60'' and it will be a super z i believe.Does your's do the 15mph as advertised?

BryceBentleyLCS
06-11-2008, 11:41 PM
lol i know,i was thinking if youd like id give you 5,000 and a brand new quick 36 superduty with 34 hrs on it if that would be of intrest to you? I dont use the quick that much and am getting ready to buy another 60'' and it will be a super z i believe.Does your's do the 15mph as advertised?

Yep 15 mph. I need alittle bigger than 36 plus I dont have a quick dealer around me for a long way. Sent you a PM

bigw
06-11-2008, 11:43 PM
Yep 15 mph. I need alittle bigger than 36 plus I dont have a quick dealer around me for a long way. Sent you a PM

lol no one has a quick dealer around them unless you are fron NC. They send you all the parts in the mail. I got the pm

BIGHEAVY
06-11-2008, 11:44 PM
how much does a new mower like that cost? i may be interested.

BryceBentleyLCS
06-11-2008, 11:46 PM
how much does a new mower like that cost? i may be interested.

MSRP is 10,890

BIGHEAVY
06-11-2008, 11:49 PM
do you think i could cut my 10 acre all flat wide open property with that/ it takes me close to 5 hours now with a woods 6215 kubota diesel with a 72 inch deck.

BryceBentleyLCS
06-11-2008, 11:53 PM
do you think i could cut my 10 acre all flat wide open property with that/ it takes me close to 5 hours now with a woods 6215 kubota diesel with a 72 inch deck.

It depends on how high and wet it is. Just like anyother mower. I dont cut all the time wide open, but you can if the grass isnt to tall.

BIGHEAVY
06-12-2008, 12:00 AM
the grass is cut weekly and never when wet it doesnt get too high in a week and i would guess i cut off no more than a couple inches. sorry to ask stupid questions but wasnt looking for anew mower this year but if i can get a great deal and save me time i would be interested.

BryceBentleyLCS
06-12-2008, 12:10 AM
the grass is cut weekly and never when wet it doesnt get too high in a week and i would guess i cut off no more than a couple inches. sorry to ask stupid questions but wasnt looking for anew mower this year but if i can get a great deal and save me time i would be interested.

Sounds like you found the right thread to be on. Remember there isnt such thing as a stupid question!!:usflag:

BIGHEAVY
06-12-2008, 12:15 AM
no guestimate on time under optimal conditions?

BryceBentleyLCS
06-12-2008, 12:22 AM
no guestimate on time under optimal conditions?

I would say that you are cutting at 6mph now at 5 hours time you have a 72" so that is a foot larger. You would be cutting almost 3 times faster but losing 12" if you cut at full width which is hard. So I would bet 2.5-3 hours max on cutting your pasture.

BIGHEAVY
06-12-2008, 12:28 AM
gonna sleep on it :sleeping:. i mapquested your location and its 6 hours each way:walking:, so that will play into my decision. if still available will contact you. thanks again:usflag:

BryceBentleyLCS
06-12-2008, 12:30 AM
No problem I would come alittle north to help you out if you were to buy

BIGHEAVY
06-12-2008, 10:08 AM
just wanted to get back to you, im just gonna keep what i have for now no need to blow 6000 for no reason thanks for all your help good luck in your sale:waving:

BryceBentleyLCS
06-12-2008, 10:13 AM
no problem thanks for letting me know:usflag:

BryceBentleyLCS
06-12-2008, 12:58 PM
Still for sale 6200.00 takes it home

BIGHEAVY
06-12-2008, 11:21 PM
ttt:usflag:

02DURAMAX
06-13-2008, 02:51 AM
http://i220.photobucket.com/albums/dd252/002DURAMAX/th_CIMG3507.jpg (http://s220.photobucket.com/albums/dd252/002DURAMAX/?action=view&current=CIMG3507.flv)
http://i220.photobucket.com/albums/dd252/002DURAMAX/CIMG3508.jpg

zurfsturfcare
06-13-2008, 02:25 PM
im sorry i have no way of getting my pics from my phone to a comp, good luck with the sale

BryceBentleyLCS
06-13-2008, 10:20 PM
ttt *newusflag*

poohdo
06-14-2008, 10:58 AM
Give me a call please,,


765-808-0542

Jerry

BryceBentleyLCS
06-15-2008, 03:40 PM
Mower Sold today. Thanks Jerry :usflag:

kyfireman2004
06-15-2008, 05:01 PM
Bryce what are you going to buy?
You need my walk behind?