PDA

View Full Version : multiple fertigation inputs


ICT Bill
06-12-2008, 10:26 PM
Hey folks
this is not a irrigation question but one from another angle but it is something you have probably seen and I have not

I am looking for a small asperation device something that will be dialable from 500:1 dilution ratio to 64:1 type of thing. It needs to fit inline and inject (probably the wrong word) into a water stream

Thanks in adavnce

Dripit good
06-13-2008, 08:21 AM
Hey folks
this is not a irrigation question but one from another angle but it is something you have probably seen and I have not

I am looking for a small asperation device something that will be dialable from 500:1 dilution ratio to 64:1 type of thing. It needs to fit inline and inject (probably the wrong word) into a water stream

Thanks in adavnce

You could check out Rid-O-Rust. Their injection pumps are variable, but I don't know what the calibration ratios are. Might work for you.
:usflag:

lowvolumejeff
06-13-2008, 02:30 PM
Not sure, but would a chemical injector work? I use Dosematic injector with my drip lines. There are other brands also. which allow variable dilutional capabilities. They are available from multiple suppliers. Jeff

lowvolumejeff
06-13-2008, 02:57 PM
http://www.dosmatic.com/index.php?page=index

Keen
06-13-2008, 05:37 PM
http://www.netafim-usa-agriculture.com/Agriculture/p-crops/p-netajet.php

http://www.netafim-usa-agriculture.com/Agriculture/p-crops/p-fertijet-FA.php

:clapping:

Az Gardener
06-13-2008, 11:52 PM
The Dosatron or Dosmatic will probably work best for you. You will also need a wye strainer. You might also check out a Chemilizer if you have decent flow rates.

I am guessing you are going to be injecting some home brew? If so stay away from the easy flows and fertigators they wont last long with the humates.