PDA

View Full Version : Tailgater ramp


nt1
06-13-2008, 06:53 PM
I bought this ramp in early March and it is virtually brand new. It has been opened maybe 50 times. I bought a Wright Stander in late March and have taken on larger properties so the tailgater ramp has not been used much at all. I was planning on using 21" toros with it, but plans have changed.

I paid $850 for it about 3 months ago, would like to get $700.00.

nt1
06-13-2008, 06:55 PM
A couple more pictures

THEGOLDPRO
06-13-2008, 07:44 PM
what kind of ramp is it?

zemzabob
06-13-2008, 08:15 PM
What's up with the wrapped up handle on the drivers side of the gate?

nt1
06-13-2008, 09:30 PM
What's up with the wrapped up handle on the drivers side of the gate?

It's just foam pipe wrap with painters masking tape to hold it on.

nt1
06-13-2008, 09:33 PM
what kind of ramp is it?

http://www.tailgateramps.com/

BryceBentleyLCS
06-13-2008, 11:10 PM
http://www.tailgateramps.com/

does it fit a f-250:usflag:

Scagguy
06-13-2008, 11:32 PM
Would that fit a Dodge 1500?

ashs inc
06-14-2008, 10:34 AM
how heavy is that ramp?

nt1
06-14-2008, 11:31 AM
I am guessing the ramp is around 100lbs but it has a spring assist to help raise and lower it. Lowering the ramp is easy and raising it feels like you are lifting about 20 lbs.

The ramp is currently on 1999 f150 and I am sure it will fit other years and models of trucks. It takes about minutes to install.

I will go get some measurements.

nt1
06-14-2008, 11:52 AM
Ok, the ramp is 7'10" long x 5'wide.

Where the ramp connects to the tailgate posts it is 63" wide.

Forgot to mention that it has a 1350lb load capacity.

kjslawn
06-14-2008, 05:39 PM
I would think if you had a 48 inch wb to tow around This ramp would save you 500 a yr in gas vs pulling a trailer. I want one

BryceBentleyLCS
06-15-2008, 11:23 PM
If you were closer to Kentucky you would have it sold.:usflag:

nt1
06-15-2008, 11:48 PM
If you were closer to Kentucky you would have it sold.:usflag:

Thanks anyway!

For anyone that might be interested I am in Dallas.

nt1
06-18-2008, 08:50 PM
Bump......

BryceBentleyLCS
06-18-2008, 09:17 PM
What is the lowest you would take for it shipped to KY?

nt1
06-19-2008, 10:48 PM
What is the lowest you would take for it shipped to KY?

I would prefer local pickup somewhere in North Texas right now, might consider shipping later.

mott413
06-20-2008, 11:38 PM
Will your Wright Stander not go up your tailgater?

THEGOLDPRO
06-21-2008, 12:14 AM
you likely paid the 850 shipped for it.you cant sell it for the price you paid including the shipping you need to take the hit on the shipping.

nt1
06-21-2008, 09:55 AM
That ramp is the shorter version, I think its a 6' ramp. Also, the 42" stander will go up the ramp just fine but there is little room in the truck after for push mowers or anything else.

This ramp I have priced at 20% less than new after shipping(my cost) and the ramp is like BRAND NEW. It would be a good deal for someone here around north texas.

So of course I am flexible on price, ....bottom line $600.00
I will be out of town until Sunday evening, I'll check back later.

nt1
07-06-2008, 12:24 PM
A couple more pictures

Reduced.... $525.00 OBO

nt1
07-12-2008, 11:32 AM
bump...............